MODEL HU & HA
HU UPSHOT BURNER- performs like an upshot burner-mounts like an inshot
HA INSHOT BURNER - flexibility and performance
Rugged cast iron adjustable venturi places the flame in optimum location for virtually
all oil furnaces and boilers.
Durable pre-drilled steel mounting flange - for easy mounting.
HU extra length riser available.
HA adjustable incoloy flame spreader. Readily removable pilot, flame spreader and pilot
lighter.
Optional adjustable orifice.
Automatic pilot relight available to protect pilot against outage in severe applications.
Gas Saver model available - pilot light is on only during heating cycle.
NEW-optional collar flange reduces tube length to 3-1/2" on HU and 1/2" on HA. |
 |
 |
MODEL HP - SPACESAVER POWER BURNER
COMPACT DESIGN - SAVES SPACE - ADJUSTABLE ORIFICE
Fits the smallest enclosures.
Fires into small combustion chambers with increased efficiency.
Easily accessible air and firing rate adjustment.
Completely factory wired with motor, transformer, and terminal block mounting on slide out
chassis.
Slide out gas valve and manifold.
Rugged steel mounting flange, 5" or 8" extension sleeve optional.
Automatic pilot relight available to protect pilot against outage in severe applications. |
|
HP - GAS SAVER POWER BURNER
AVAILABLE WITH INTERMITTENT PILOT
3-5 second prepurge, redundant valve and ignition transformer completely factory wired.
Intermittent pilot light is on only during heating cycle |
HP Series Forced Draft Burner
Short flame for best performance in all applications.
Fires into long combustion chambers but also into shortest chambers.
Increases efficiency.
Patented vacuum mixing method eliminates pulsation or "lifting".
Quieter operation.
Smoother lightoff.
Adjustable input with regulator located in the gas valve.
Flange or pedestal mounting.
1/3 H.P. 3450 RPM Motor to HP-1000
1/2 H.P. 3450 RPM Motor on HP-1500
3/4 H.P. 3450 RPM Motor on HP-2500 and HP-3500
Low gas pressure design.
Requires only 2.0" to 5.0" W.C. pressure. |
 |
G2T POWER GAS BURNER
A revolutionary partial pre-mix system uses Adams unique eductor-venturi concept.
High static pressure capabilities assure firing even under adverse conditions.
For dependable direct spark ignition, the burner uses a separate high voltage transformer.
A special design manifold permits external orifice changes without the need for
disassembling the burner.
Six different stainless steel retention heads available to cover most input ranges. |
|
